Products – Expanded Metal Sheets

Raised expanded metal, also referred to as standard expanded metal, is the form of expanded metal as it comes off the expanding press. The shearing and stretching of the expanding process creates strands and bonds that are set at a uniform angle to the plane on the sheet. This adds strength and rigidity to the material, while providing a directional skid-resistant surface.

Flattened expanded metal is produced by passing standard raised expanded metal through a cold roll and flattening the product.

Fasteel stocks a wide range of expanded metal in raised or flattened configurations as well as wire and woven mesh. If you don’t see what you need here, contact us and we can get it for you fast!

Grades: ASTM A36

Common Applications:


Jump to: Raised Mesh, Flattened Mesh, Heavy Gratings



Standard Raised Mesh

H= Heavy G=Gauge L=Light R=Raised

Style No.
(Use for
ordering)		 Approx.
Wt. Per
Sheet		 Centre to
Centre of
Bridges		 Size of
Openings		 Strand % Open
Area
A
SWD		 B
LWD		 C
SWD		 D
LWD		 E
Thick		 F
Width
C 3/16 – 20R 29 0.200 0.500 0.080 0.313 0.036 0.063 40-44
C 1/4 – 20R 27 0.250 1.000 0.125 0.718 0.036 0.072 46-58
C 5/16 – 18R 33 0.292 0.750 0.108 0.563 0.048 0.087 48-54
C 1/2 – 18R 22 0.500 1.200 0.438 0.938 0.048 0.082 72-78
C 1/2 – 16R 25 0.500 1.200 0.375 0.938 0.060 0.087 61-65
C 1/2 – 13R 47 0.500 1.200 0.312 0.938 0.090 0.096 52-58
C 3/4 – 16R 17 0.923 2.000 0.813 1.750 0.060 0.099 84-88
C 3/4 – 13R 26 0.932 2.000 0.750 1.680 0.090 0.098 76-80
C 3/4 – 9 (10G)R 58 0.932 2.000 0.688 1.500 0.135 0.149 65-70
C 1 – 16R 20 1.125 2.375 0.844 1.690 0.060 0.124 76-81
C 1 – 14R 24 1.125 2.375 0.875 1.563 0.075 0.122 75-79
C 1 – 12R 33 1.125 2.375 0.907 1.563 0.105 0.109 71-75
C 1 – 10HR 64 1.125 2.375 0.750 1.563 0.135 0.188 67-71
C 1 – 10HR* 64 1.125 2.375 0.750 1.563 0.135 0.178 67-71
C 1 – 10LR 54 1.125 2.375 0.875 1.563 0.135 0.159 67-71
C 1 1/2 – 14R 11 1.330 3.000 1.320 2.630 0.075 0.075 90-93
C 1 1/2 – 13R 19 1.330 3.000 1.188 2.500 0.090 0.107 85-88
C 1 1/2 – 12R 19 1.330 3.000 1.112 2.375 0.105 0.109 81-85
C 1 1/2 – 9 (10G)R 38 1.330 3.000 1.125 2.375 0.135 0.142 77-80
C 1 1/2 – 10LR 54 1.330 3.000 1.130 2.470 0.135 0.213 72-76
C 1 1/2 – 10HR 64 1.330 3.000 0.830 2.375 0.135 0.240 70-74

*8′ SWD x 4′ LWD

Back to top

Flattened Mesh

Style No.
(Use for
ordering)		 Approx.
Wt. Per
Sheet		 Centre to
Centre of
Bridges		 Size of
Openings		 Strand % Open
Area
A
SWD		 B
LWD		 C
SWD		 D
LWD		 E
Thick		 F
Width
C 3/16 – 20F 28 0.218 0.500 0.094 0.343 0.032 0.063 39-43
C 1/4 – 20F 26 0.250 1.050 0.084 0.715 0.030 0.079 30-45
C 5/16 – 18F 30 0.375 0.750 0.191 0.563 0.040 0.092 43-47
C 1/2 – 18F 21 0.500 1.250 0.313 1.000 0.040 0.097 53-57
C 1/2 – 16F 24 0.500 1.250 0.313 1.000 0.050 0.096 53-57
C 1/2 – 13F 45 0.500 1.250 0.375 1.000 0.070 0.110 50-56
C 3/4 – 16F 17 0.923 2.100 0.750 1.750 0.048 0.110 74-78
C 3/4 – 13F 24 0.923 2.100 0.688 1.781 0.070 0.108 72-77
C 3/4 – 9 (10G)F 56 0.923 2.100 0.563 1.688 0.120 0.165 63-69
C 1 – 16F 19 1.312 2.375 1.000 2.000 0.051 0.132 73-76
C 1 – 14F 23 1.312 2.375 1.000 2.000 0.070 0.125 70-75
C 1 – 12F 32 1.312 2.375 1.000 2.000 0.085 0.156 66-71
C 1 – 10LF 53 1.312 2.375 1.000 2.000 0.120 0.165 58-64
C 1 1/2 – 14F 10 1.330 3.200 1.060 2.750 0.067 0.124 79-85
C 1 1/2 – 13F 18 1.330 3.200 1.060 2.750 0.070 0.120 77-82
C 1 1/2 – 12F 18 1.330 3.200 1.296 2.625 0.085 0.110 78-82
C 1 1/2 – 9 (10G)F 36 1.330 3.200 1.000 2.560 0.110 0.158 72-78
C 1 1/2 – 10LF 53 1.330 3.200 1.000 2.690 0.120 0.175 65-69

Back to top

Heavy Gratings

Style No.
(Use for
ordering)		 Approx.
Wt. Per
Sheet		 Centre to
Centre of
Bridges		 Size of
Openings		 Strand % Open
Area
A
SWD		 B
LWD		 C
SWD		 D
LWD		 E
Thick		 F
Width
3 lb Grating 96 1.330 5.330 0.940 3.440 0.183 0.264 60
4 lb Grating 128 1.330 5.330 0.940 3.440 0.215 0.300 55
5 lb Grating 160 1.330 5.330 0.813 3.380 0.250 0.331 50
6.25 lb Grating 200 1.410 5.330 0.813 3.380 0.250 0.410 50

Back to top

REQUEST A QUOTE